Journal of Manufacturing Science and Engineering - 巻 141 / 号 9
| タイトル | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 著者 | 巻 | 号 | ページ | 年 | PKV | ||||
| Boundary Slope Control in Topology Optimization for Additive Manufacturing: For Self-Support and Surface Roughness | |||||||||
| Cunfu Wang, Xiaoping Qian, William D. Gerstler, Jeff Shubrooks | 141 | 9 | 091001–None | 2019 | 41.59 | ||||
| 平均評価: 0.0 / 5 (0 件のレビュー) | |||||||||
| Variations of Energy Demand With Process Parameters in Cylindrical Drawing of Stainless Steel | |||||||||
| Lei Li, Haihong Huang, Fu Zhao, Xiang Zou, Qi Lu, Yue Wang, Zhifeng Liu, John W. Sutherland | 141 | 9 | 091002–None | 2019 | 35.73 | ||||
| 平均評価: 0.0 / 5 (0 件のレビュー) | |||||||||
| Microhole Drilling by High-Intensity Focused Ultrasound-Assisted Water-Confined Laser Micromachining | |||||||||
| Ze Liu, Benxin Wu, Zheng Kang, Zhen Yang | 141 | 9 | 091003–None | 2019 | 34.67 | ||||
| 平均評価: 0.0 / 5 (0 件のレビュー) | |||||||||
| Mechanical Recycling of Low-Density Polyethylene/Carbon Nanotube Composites and Its Effect on Material Properties | |||||||||
| Felicia Stan, Nicoleta-Violeta Stanciu, Catalin Fetecau, Ionut-Laurentiu Sandu | 141 | 9 | 091004–None | 2019 | 37.69 | ||||
| 平均評価: 0.0 / 5 (0 件のレビュー) | |||||||||
| Where Do We Start? Guidance for Technology Implementation in Maintenance Management for Manufacturing | |||||||||
| Michael P. Brundage, Thurston Sexton, Melinda Hodkiewicz, KC Morris, Jorge Arinez, Farhad Ameri, Jun Ni, Guoxian Xiao | 141 | 9 | 091005–None | 2019 | 23.71 | ||||
| 平均評価: 0.0 / 5 (0 件のレビュー) | |||||||||
| Multizone Rapid Thermal Processing to Overcome Challenges in Carbon Nanotube Manufacturing by Chemical Vapor Deposition | |||||||||
| Jaegeun Lee, Moataz Abdulhafez, Mostafa Bedewy | 141 | 9 | 091006–None | 2019 | 27.67 | ||||
| 平均評価: 0.0 / 5 (0 件のレビュー) | |||||||||
| Involute Curve Roller Trace Design and Optimization in Multipass Conventional Spinning Based on the Forming Clearance Compensation | |||||||||
| Zixuan Li, Xuedao Shu | 141 | 9 | 091007–None | 2019 | 38.57 | ||||
| 平均評価: 0.0 / 5 (0 件のレビュー) | |||||||||
| Characterization of Tool–Chip Interface Temperature Measurement With Thermocouple Fabricated Directly on the Rake Face | |||||||||
| Sinan Kesriklioglu, Cory Arthur, Justin D. Morrow, Frank E. Pfefferkorn | 141 | 9 | 091008–None | 2019 | 30.77 | ||||
| 平均評価: 0.0 / 5 (0 件のレビュー) | |||||||||
| Study of Sheared Edge Formability of Ultra-High Strength DP980 Sheet Metal Blanks | |||||||||
| Saeid Nasheralahkami, Weitian Zhou, Sergey Golovashchenko | 141 | 9 | 091009–None | 2019 | 41.57 | ||||
| 平均評価: 0.0 / 5 (0 件のレビュー) | |||||||||
| Additive Manufacturing Processes for Infrastructure Construction: A Review | |||||||||
| Abhinav Bhardwaj, Scott Z. Jones, Negar Kalantar, Zhijian Pei, John Vickers, Timothy Wangler, Pablo Zavattieri, Na Zou | 141 | 9 | 091010–None | 2019 | 31.63 | ||||
| 平均評価: 0.0 / 5 (0 件のレビュー) | |||||||||