|
Microstructural Evaluation of Inductively Sintered Aluminum Matrix Nanocomposites Reinforced with Silicon Carbide and/or Graphene Nanoplatelets for Tribological Applications
|
|
Mohammad Islam, Yasir Khalid, Saqib Anwar
|
49 |
7 |
2963–2976 |
2018 |
9.39 |
|
平均評価: 0.0 / 5
(0 件のレビュー)
|
|
Combined Effect of Heating Rate and Microalloying Elements on Recrystallization During Annealing of Dual-Phase Steels
|
|
Marion Bellavoine, Myriam Dumont, Philippe Maugis
|
49 |
7 |
2865–2875 |
2018 |
9.38 |
|
平均評価: 0.0 / 5
(0 件のレビュー)
|
|
On the Prediction of Hot Tearing in Al-to-Steel Welding by Friction Melt Bonding
|
|
N. Jimenez-Mena, P. J. Jacques, A. Simar
|
49 |
7 |
2692–2704 |
2018 |
9.32 |
|
平均評価: 0.0 / 5
(0 件のレビュー)
|
|
High Strength and Ductility of Additively Manufactured 316L Stainless Steel Explained
|
|
Md. Shamsujjoha, Sean R. Agnew, Tabitha A. Newman
|
49 |
7 |
3011–3027 |
2018 |
9.28 |
|
平均評価: 0.0 / 5
(0 件のレビュー)
|
|
The Influence of the Support Structure on Residual Stress and Distortion in SLM Inconel 718 Parts
|
|
Tatiana Mishurova, Sandra Cabeza, Giovanni Bruno
|
49 |
7 |
3038–3046 |
2018 |
8.7 |
|
平均評価: 0.0 / 5
(0 件のレビュー)
|
|
Investigation of Ta-MX/Z-Phase and Laves Phase as Precipitation Hardening Particles in a 12 Pct Cr Heat-Resistant Steel
|
|
J. P. Sanhueza, D. Rojas, S. Suarez
|
49 |
7 |
2951–2962 |
2018 |
8.58 |
|
平均評価: 0.0 / 5
(0 件のレビュー)
|
|
Soldering of Mg Joints Using Zn-Al Solders
|
|
Tomasz Gancarz, Katarzyna Berent, Katarzyna Janik
|
49 |
7 |
2684–2691 |
2018 |
8.54 |
|
平均評価: 0.0 / 5
(0 件のレビュー)
|
|
A Simplified Three-Phase Model of Equiaxed Solidification for the Prediction of Microstructure and Macrosegregation in Castings
|
|
Knut Omdal Tveito, Akash Pakanati, Miha Založnik
|
49 |
7 |
2778–2794 |
2018 |
7.71 |
|
平均評価: 0.0 / 5
(0 件のレビュー)
|
|
A Comparative Study on the Microstructure and Mechanical Properties of Cu6Sn5 and Cu3Sn Joints Formed by TLP Soldering With/Without the Assistance of Ultrasonic Waves
|
|
H. Y. Zhao, J. H. Liu, J. C. Feng
|
49 |
7 |
2739–2749 |
2018 |
7.64 |
|
平均評価: 0.0 / 5
(0 件のレビュー)
|
|
Oxide Morphology of a FeCrAl Alloy, Kanthal APMT, Following Extended Aging in Air at 300 °C to 600 °C
|
|
Nan Li, Stephen S. Parker, Andrew T. Nelson
|
49 |
7 |
2940–2950 |
2018 |
7.64 |
|
平均評価: 0.0 / 5
(0 件のレビュー)
|