|
Fatigue behavior and microstructural characterization of a high strength steel for welded railway rails
|
|
R. Baptista, T. Santos, J. Marques, M. Guedes, V. Infante
|
117 |
None |
1–8 |
2018 |
34.64 |
|
Average Rating: 0.0 / 5
(0 Reviews)
|
|
Oxide induced crack closure in the near threshold regime: The effect of oxide debris release
|
|
J. Maierhofer, D. Simunek, H.-P. Gänser, R. Pippan
|
117 |
None |
21–26 |
2018 |
38.7 |
|
Average Rating: 0.0 / 5
(0 Reviews)
|
|
LCF behaviour and a comprehensive life prediction model for AlSi10Mg obtained by SLM
|
|
S. Romano, L. Patriarca, S. Foletti, S. Beretta
|
117 |
None |
47–62 |
2018 |
39.52 |
|
Average Rating: 0.0 / 5
(0 Reviews)
|
|
Fatigue properties and material characteristics of additively manufactured AlSi10Mg – Effect of the contour parameter on the microstructure, density, residual stress, roughness and mechanical properties
|
|
Emilie Beevers, Ana D. Brandão, Johannes Gumpinger, Michael Gschweitl, Tommaso Ghidini
|
117 |
None |
148–162 |
2018 |
46.48 |
|
Average Rating: 0.0 / 5
(0 Reviews)
|
|
Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing
|
|
Hiroshige Masuo, Yuzo Tanaka, Shotaro Morokoshi, Hajime Yagura, Yukitaka Murakami
|
117 |
None |
163–179 |
2018 |
36.56 |
|
Average Rating: 0.0 / 5
(0 Reviews)
|
|
In-situ investigations of structural changes during cyclic loading of aluminium by high resolution reciprocal space mapping
|
|
Annika M. Diederichs, Felix Thiel, Ulrich Lienert, Wolfgang Pantleon
|
117 |
None |
206–216 |
2018 |
57.54 |
|
Average Rating: 0.0 / 5
(0 Reviews)
|
|
Static and cyclic strength properties of brittle adhesives with porosity
|
|
Garbiñe Fernandez, Dirk Vandepitte, Hodei Usabiaga, Stijn Debruyne
|
117 |
None |
340–351 |
2018 |
55.23 |
|
Average Rating: 0.0 / 5
(0 Reviews)
|
|
Casting defects in structural components: Are they all dangerous? A 3D study
|
|
I. Serrano-Munoz, J.-Y. Buffiere, C. Verdu
|
117 |
None |
471–484 |
2018 |
50.1 |
|
Average Rating: 0.0 / 5
(0 Reviews)
|
|
Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by selective laser melting
|
|
Yoichi Yamashita, Takao Murakami, Rei Mihara, Masami Okada, Yukitaka Murakami
|
117 |
None |
485–495 |
2018 |
41.62 |
|
Average Rating: 0.0 / 5
(0 Reviews)
|
|
Effects of intermittent loading on fatigue life of a high strength steel in very high cycle fatigue regime
|
|
Chengqi Sun, Qingyuan Song, Yuanpei Hu, Yujie Wei
|
117 |
None |
9–12 |
2018 |
46.46 |
|
Average Rating: 0.0 / 5
(0 Reviews)
|