|
Influence of prior shot peening variables on the fatigue life of micro arc oxidation coated 6061-T6 Al alloy
|
|
L. Rama Krishna, Y. Madhavi, T. Sahithi, Nitin P. Wasekar, D. Srinivasa Rao
|
106 |
None |
165–174 |
2018 |
45.66 |
|
Average Rating: 0.0 / 5
(0 Reviews)
|
|
The early stage of fatigue crack initiation in a 12%Cr martensitic steel
|
|
Gulzar Seidametova, Jean-Bernard Vogt, Ingrid Proriol Serre
|
106 |
None |
38–48 |
2018 |
20.0 |
|
Average Rating: 0.0 / 5
(0 Reviews)
|
|
Multiaxial variable amplitude fatigue life analysis using the critical plane approach, Part II: Notched specimen experiments and life estimations
|
|
Nicholas R. Gates, Ali Fatemi
|
106 |
None |
56–69 |
2018 |
19.79 |
|
Average Rating: 0.0 / 5
(0 Reviews)
|
|
Fatigue crack growth in diffusion-bonded Ti-6Al-4V laminate with unbonded zones
|
|
Xiaofan He, Yinghao Dong, Yuhai Li, Xiangming Wang
|
106 |
None |
1–10 |
2018 |
19.62 |
|
Average Rating: 0.0 / 5
(0 Reviews)
|
|
Determination of the fatigue critical distance according to the Line and the Point Methods with rounded V-notched specimen
|
|
C. Santus, D. Taylor, M. Benedetti
|
106 |
None |
208–218 |
2018 |
19.33 |
|
Average Rating: 0.0 / 5
(0 Reviews)
|
|
Off-axis fatigue behaviour of unidirectional laminates based on a microscale fatigue damage model under different stress ratios
|
|
Bijan Mohammadi, Babak Fazlali
|
106 |
None |
11–23 |
2018 |
19.07 |
|
Average Rating: 0.0 / 5
(0 Reviews)
|
|
High-cycle fatigue strength of ultrafine-grained 5483 Al-Mg alloy at low and elevated temperature in comparison to conventional coarse-grained Al alloys
|
|
Kamil Majchrowicz, Zbigniew Pakieła, Maciej Giżyński, Maciej Karny, Mariusz Kulczyk
|
106 |
None |
81–91 |
2018 |
18.77 |
|
Average Rating: 0.0 / 5
(0 Reviews)
|
|
Austenite plasticity mechanisms and their behavior during cyclic loading
|
|
Surajit Kumar Paul, Nicole Stanford, Timothy Hilditch
|
106 |
None |
185–195 |
2018 |
18.29 |
|
Average Rating: 0.0 / 5
(0 Reviews)
|
|
Directional and notch effects on the fatigue behavior of as-built DMLS Ti6Al4V
|
|
Gianni Nicoletto
|
106 |
None |
124–131 |
2018 |
18.03 |
|
Average Rating: 0.0 / 5
(0 Reviews)
|
|
Fatigue behavior of an ultrafine-grained metastable CrMnNi steel tested under total strain control
|
|
M. Droste, C. Ullrich, M. Motylenko, M. Fleischer, H. Biermann
|
106 |
None |
143–152 |
2018 |
17.97 |
|
Average Rating: 0.0 / 5
(0 Reviews)
|