Powered by Engineering Brain, Japan | What is PKV? | PKV Methodology | KnowledgeRank v4.0.0: PKV Trends of My Authored Papers Are Now Available on My Page

International Journal of Fatigue - 巻 106 / 号 None

タイトル
著者 巻 号 ページ 年 PKV
Fatigue crack growth in diffusion-bonded Ti-6Al-4V laminate with unbonded zones
Xiaofan He, Yinghao Dong, Yuhai Li, Xiangming Wang 106 None 1–10 2018 0.0
平均評価: 0.0 / 5 (0 件のレビュー)
Off-axis fatigue behaviour of unidirectional laminates based on a microscale fatigue damage model under different stress ratios
Bijan Mohammadi, Babak Fazlali 106 None 11–23 2018 0.0
平均評価: 0.0 / 5 (0 件のレビュー)
Investigation of the effect of porosity on the high cycle fatigue behaviour of cast Al-Si alloy by X-ray micro-tomography
Viet-Duc Le, Nicolas Saintier, Franck Morel, Daniel Bellett, Pierre Osmond 106 None 24–37 2018 0.0
平均評価: 0.0 / 5 (0 件のレビュー)
The early stage of fatigue crack initiation in a 12%Cr martensitic steel
Gulzar Seidametova, Jean-Bernard Vogt, Ingrid Proriol Serre 106 None 38–48 2018 0.0
平均評価: 0.0 / 5 (0 件のレビュー)
Effect of single tensile overload on fatigue crack growth behavior in DP780 dual phase steel
Shengci Li, Yinghui Zhang, Liang Qi, Yonglin Kang 106 None 49–55 2018 0.0
平均評価: 0.0 / 5 (0 件のレビュー)
Multiaxial variable amplitude fatigue life analysis using the critical plane approach, Part II: Notched specimen experiments and life estimations
Nicholas R. Gates, Ali Fatemi 106 None 56–69 2018 0.0
平均評価: 0.0 / 5 (0 件のレビュー)
Consideration of the runouts and their subsequent retests into S-N curves modelling based on a three-parameter Weibull distribution
Paul Dario Toasa Caiza, Thomas Ummenhofer 106 None 70–80 2018 0.0
平均評価: 0.0 / 5 (0 件のレビュー)
High-cycle fatigue strength of ultrafine-grained 5483 Al-Mg alloy at low and elevated temperature in comparison to conventional coarse-grained Al alloys
Kamil Majchrowicz, Zbigniew Pakieła, Maciej Giżyński, Maciej Karny, Mariusz Kulczyk 106 None 81–91 2018 0.0
平均評価: 0.0 / 5 (0 件のレビュー)
A 3D finite element modelling of crystalline anisotropy in rolling contact fatigue
Akhil Vijay, Neil Paulson, Farshid Sadeghi 106 None 92–102 2018 0.0
平均評価: 0.0 / 5 (0 件のレビュー)
Experimental investigation on the effect of shot peening on contact fatigue strength for carburized and quenched gears
Wei Li, Bingshu Liu 106 None 103–113 2018 0.0
平均評価: 0.0 / 5 (0 件のレビュー)